By Will Rietveld and Janet Reichl
Introduction
Ultralight gear keeps getting better, and provides more
creature comfort. Nowadays many UL backpackers choose a lightweight inflatable sleeping
pad instead of a closed cell foam pad. Why? -- Because the weight is similar
(except for the skimpiest CCF pads), they are less bulky to pack, and they are
much more comfortable. Bottom line, a good night’s sleep is very important
after a full day on the trail, so many hikers choose a comfortable sleeping pad
for their luxury item.
For an ultralight inflatable sleeping pad, the Therm-a-Rest
NeoAir X-Lite is state-of-the-art. But it’s not perfect. Although its very
lightweight, comfortable, and provides some insulation, the NeoAirs are very
expensive, a bit narrow when inflated, noisy, and have a noticeable “drop-off”
at the foot end if you choose the shorter pad.
For awhile we had the Kooka
Bay inflatable pads, which were both
lightweight and inexpensive, but unfortunately Kooka Bay
is now out of business. The new Gossamer Gear Air Beam Sleepers fill that
niche, and significantly improve on the design and quality.
Description
While simple air-only inflatable sleeping pads from other
companies (except the NeoAir) are simply not light enough or durable enough, the
new Gossamer Gear pads get it right with adequately durable materials, quality
construction, sleeper-friendly design, and reasonable pricing.
| The Gossamer Gear Air Beam Sleepers currently come in four sizes; I tested three sizes: S, M, and XL. |
The initial launch of the Air Beam Sleepers comes in four
sizes, as summarized in the following table. Data are Gossamer Gear
specifications.
Size
|
Width (inches)
|
Length (inches)
|
Thickness (inches)
|
Weight (ounces)
|
Cost (USD)
|
S
|
21 tapering to 14.5
|
36
|
2.5 tapering to 1.5
|
7.2
|
82
|
M
|
21 tapering to 14.5
|
48
|
2.5 tapering to 1.5
|
9.05
|
88
|
L
|
21 tapering to 14.5
|
56
|
2.5 tapering to 1.5
|
10.35
|
95
|
XL
|
28 tapering to 19
|
56
|
2.5 tapering to 1.5
|
13.8
|
99
|
Notable features
evident from the table, and other observations:
- The pad width is tapered to save weight. Also, the outer tubes are slightly larger in diameter to help a sleeper stay centered on the pad. Gossamer Gear describes this feature as follows: “Slightly higher side rails to let you know when you are on the edge.”
- Pad thickness is also tapered to minimize the drop-off at the foot end. The foot end drop-off of other manufacturer’s pads makes it feel like your feet are hanging over a cliff. The design of the GG pads minimizes that issue.
- A feature useful to some hikers is integrated tabs on the sides of the Sleepers for securing them to a quilt or foam pad.
- The weights of the Gossamer Gear pads are comparable to the Therm-A-Rest NeoAir pads. (The pad dimensions differ so it’s hard to directly compare weights.)
- The Gossamer Gear pads sell for about half the cost of the NeoAir pads.
- So far, the Gossamer Gear pads are only available in shorter lengths. This is apparently due to the limited width (60 inches) of the bulk fabric. Although many UL backpackers will choose a shorter pad to save weight, many LW packpackers will insist on a full-length (72 inches long) pad, so Gossamer Gear needs to offer a full-length pad pronto, or lose a lot of sales.
Testing
I tested the pads on several backpacking trips and a car
camping trip where my wife and I slept on the Gossamer Gear pads in a floorless
tent and a double-wall tent, in temperatures down to freezing.
| Gossamer Gear size L pad in a floorless pyramid shelter; the nighttime low was 34F. I used a LW inflatable pillow at the head end and put my empty backpack under my feet. |
| We camped one night in a LW two person double wall tent out in the dunes at White Sands National Park, New Mexico; the morning low was a chilly 33F. |
Our observations
after testing the pads in several shelters and conditions:
- The pads inflate quickly by mouth, faster than the NeoAir pads.
- The top and bottom fabrics are a good balance of lightweight and durability; we did not have any punctures, but it is still wise to avoid camping on sharp objects.
- The top and bottom fabrics have good slide resistance; we did not have any problems with sliding around on a plastic groundsheet or nylon tent floor.
- Janet reported some issues with staying on the size M pad, although that was not an issue for me on the size XL pad; more on this below.
- For colder weather camping on a shorter pad, we found it necessary to use a LW inflatable pillow (or other gear) to support our head, and lay our empty backpacks at the foot end to insulate our feet. This is a typical routine for using a shorter sleeping pad (48 inches long or less).
- On colder nights, which were the case for most of our testing, we felt our bottomside getting cold at around 35F. The pads are uninsulated and require some supplementary insulation for camping in colder temperatures.
The “higher side rails” feature, meaning larger diameter
outside tubes, applies to only the size XL pad. After my wife and I had dissimilar
experiences sleeping on the pads, we looked more closely at the tube diameter
difference in the pads, and found something interesting. The size XL (wide) pad
has distinctly wider outside tubes; laid flat, the outside tubes are 25
millimeters wider at the top and bottom of the pad, meaning the tubes will
inflate to a larger diameter. However, the outside tube width in the S and M
sizes we tested is the same as its neighbors at the head end of the pad and 6-7
millimeters wider at the foot end of the pad. So, for the size XL pad, the
larger outside tubes definitely provide their intended higher side rail
function, but the similar tube sizing in the other pad sizes does not provide
any effective side rail function at all (only a slightly larger tube diameter
at the foot end).
I consulted with Gossamer Gear on the discrepancy and learned that, in the manufacturing process, they found it expedient to go with only one "die" to press the pads. The (expensive) die they use is the size of the XL pads; for the other pad sizes they omit the inside tubes, so the tubes are in fact all the same size. They hope to make standard size (72-inch long) pads in the next production run.
I consulted with Gossamer Gear on the discrepancy and learned that, in the manufacturing process, they found it expedient to go with only one "die" to press the pads. The (expensive) die they use is the size of the XL pads; for the other pad sizes they omit the inside tubes, so the tubes are in fact all the same size. They hope to make standard size (72-inch long) pads in the next production run.
Another observation to note on the air-only inflatable pads
is the feeling of floating while sleeping on them. Basically you feel like you
are floating, like sleeping on a waterbed. Sleeping on an inflatable foam pad
(like a traditional Therm-A-Rest) provides more support for your body, so you
don’t feel like you are floating. All this is saying is that you need to get
accustomed to sleeping on an airbed.
Evaluation
Overall we are very positive on the new Gossamer Gear Air
Beam Sleepers. They are well-designed, a good balance of lightweight and
durability, incorporate some innovative sleeper-friendly features, and are
reasonably priced.
Pros:
- Pads are sleeper-friendly with their tapering width and thickness, plus oversized outside tubes (XL pad only).
- Weight is comparable with the NeoAir pads.
- Cost is about half that of the NeoAir pads.
- Fabric is a great balance of lightweight and durability, slip-resistant, and a cheerful color.
- They inflate quickly and are very comfortable to sleep on, much more comfortable than a closed cell foam pad.
Cons:
- No full-length (72-inch) sizes are currently available; which is a glaring deficiency in the sizes available.
- Only the size XL pad clearly has larger outside tubes to provide a side rail effect, that feature is missing on the other pad sizes.
- An air-only inflatable sleeping pad, i.e. an airbed, gives a floating feeling, while a foam core inflatable pad is more supportive (but heavier).
- These uninsulated pads are cold to sleep on when temperatures drop below about 35F. (However, that is easily remedied by placing a Gossamer Gear ThinLight foam pad on top of the inflatable pad; the 1/8-inch thick 2.6 ounce ThinLight is sufficient.)